Shanghai Chucheng Information Technology Co.,Ltd.

Date: 3rd November 2016
Huawei NE20E-S Universal Service Router NE20E-S2E NE20E-S2F NE20E-S4 NE20E-S8 NE20E-S16 VRP Router
NetEngine (NE20E-S) Series Universal Service Routers are high-end network products developed for transportation, finance, electricity, government, education, and enterprise networks. They serve as aggregation nodes for IP backbone networks, core nodes on small and medium enterprise networks, edge nodes on campus networks, and access nodes on small and medium education networks.NE20E-S routers run on the Versatile Routing Platform (VRP) operating system and use Huawei-developed NP chips and hardware-based forwarding and non-blocking switching technologies. They have the following features:Line-rate forwarding, carrier-class reliability, excellent scalability, a well-designed Quality of Service (QoS) mechanism, and strong service processing capabilitiesLayer 2 Virtual Private Network (L2VPN), L3VPN, multicast, Multicast VPN (MVPN), Multiprotocol Label Switching (MPLS) Traffic Engineering (TE), and QoS for carrier-class transmission reliabilityGeneric Routing Encapsulation (GRE), IP Security (IPSec), Network Address Translation (NAT), and NetStream Support for IPv6 and smooth transition from IPv4 to IPv6They can be deployed at the access and aggregation layers of IP/MPLS networks and work with other NE routers to provide an all-around network solution to satisfy service requirements in the future.Product appearanceProduct characteristicsAdvanced VRP platformNE20E-S routers use the latest VRP8 platform, which is also used by the NE5000E core router. The VRP uses the Resilient Distributed Framework (RDF), with separated management plane, service plane, data plane, and monitoring module to increase system flexibility, reliability, manageability, and expandability.The VRP system is mature. So far, more than 4 million sets are running on live networks. Its rich features and stability have proven themselves through a wide variety of applications.Huawei-developed chips for flexibilityNE20E-S servers use built-in NP chips developed by Huawei to give them a flexible programmable architecture. Microcode programming can be used for new service deployment, without replacing hardware, to save money. In addition, this architecture shortens the technological innovation cycle and speeds up new service launches.Leading-edge design conserves energyHuawei NE20E-S routers use a leading-edge design to lower power consumption and provide better environmental protection. NE20E-S routers are only 8.6 inches (220 mm) deep and have a low height of 2U to reduce installation space. They can be used where the ambient temperature is between -40oF and 149oF (-40oC and 65oC).Comprehensive access and aggregationThe NE20E-S series supports various interfaces (E1/CE1, POS, CPOS, GE, 10 GE, and 40 GE). High-density fixed ports for access and aggregation WAN services and Ethernet Multi-Service Transmission Platform (MSTP) aggregation services, satisfying a wide range of service requirements.Powerful service processingThe NE20E-S provides several types of powerful service processing:Routing: The routers support several routing protocols, such as Routing Information Protocol (RIP), Open Shortest Path First (OSPF), Intermediate System-to-Intermediate System (IS-IS), Border Gateway Protocol version 4 (BGP4), and multicast routing. They also support plain and cipher text authentication and fast convergence. These features keep networks stable and secure in complex routing environmentsService carrier: The NE20E-S series can deploy L2VPN, L3VPN, and MVPN at the same time, if necessary. They also support TE, selective 802.1Q-in-802.1Q (QinQ), Dynamic Host Configuration Protocol (DHCP), and NetStream. NE20E-Ss can provide access for traditional and newly emerging services to satisfy multiple service environment needsMulticast: NE20E-S routers support IPv4/IPv6 multicast protocols, such as Protocol Independent Multicast-Sparse Mode (PIM-SM), PIM-Source Specific Multicast (PIM-SSM), Multicast Listener Discovery v1 (MLDv1), MLDv2, Internet Group Membership Protocol v3 (IGMPv3), and IGMP snooping. The routers can carry video services, such as Internet Protocol Television (IPTV), and satisfy multicast service requirements on any networkAll-around reliabilityNE20E-S routers provide 99.999% multi-level reliability at the equipment, network, and service levels for carrier-class service. Reliability protection levels include:Equipment: NE20E-S routers provide redundant backup for key components. The components support hot swap and hot backup. The NE20E-S series uses technologies, such as Non-Stop Routing (NSR), Non-Stop Forwarding (NSF), and In-Service Software Upgrade (ISSU) to ensure uninterrupted service forwarding Network: Network-level reliability comes from IP Fast Re-Route (FRR), Label Distribution Protocol (LDP) FRR, VPN FRR, TE FRR, hot standby, fast convergence of Interior Gateway Protocols (IGP), BGP, and multicast routes, Virtual Router Redundancy Protocol (VRRP), trunk load balancing and backup, hardware-based Bi-directional Forwarding Detection (BFD) of 3.3 ms, MPLS OAM, and Ethernet OAM.Service: Huawei provides service-level reliability for L2VPNs and L3VPNs with VPN FRR, E-VRRP, VLL FRR, Ethernet OAM, and PW redundancy. These technologies ensure stable and reliable service operation with no service interruption?Flexible Virtual System (VS) technologyA physical router can be divided into multiple logical routers with resources separated between them. Services can be deployed on different VSs to form a multi-service network with service separation. VSs enhance security and reliability.Huawei IP Hard Pipe technologyIP Hard Pipe is a Huawei IP network-based access technology. It works with MPLS TE and HQoS and reserves hardware resources for dedicated bandwidth on leased line services to minimize delays and provide high reliability.IP Hard Pipe hardware isolates soft and hard pipe bandwidths so they cannot be pre-empted. A hard pipe is similar to a Synchronous Digital Hierarchy (SDH) rigid pipe. IP Hard Pipe's IP Flow Performance Measurement (FPM) measures the service quality of flows and uses NMS and uTraffic to display the results. Real-time operating status makes IP leased line services controllable, manageable, and visible.OAM technologies that are easy to deploy and maintainDetection packets can be sent periodically or manually to check network connectivity for fault locations and diagnosis. P2P Ethernet in the First Mile (EFM), E2E Connectivity Fault Management (CFM), E2E Y.1731, and their combinations provide a complete Ethernet OAM solution.An RFC 2544-compliant flow test monitors offline performance. RFC 2544 defines a set of standard methods for evaluating network performance using different networking scenarios with different packet formats. During a test, a device simulates network packets and sends them to itself so it can measure performance.RFC 2544 tests are done before service provisioning and no tester is needed. Customers can use RFC 2544 tests before service cut-over to evaluate whether network performance indicators are ready.NE20E-S routers support Huawei-developed IP FPM to measure IP network performance. IP FPM directly measures IP service packets and monitors service changes online for fast fault locating. It provides highly-accurate measurements and can be flexibly deployed with no impact on services.Product specificationsItemNE20E-S2ENE20E-S2FNE20E-S4NE20E-S8NE20E-S16Switching Capacity160 Gbit/s320 Gbit/s480 Gbit/s480 Gbit/s480 Gbit/sForwarding Performance70 Mpps150 Mpps180 Mpps360 Mpps360 MppsFixed Ports2 x 10 GE(SFP+) and 24 x GE (SFP)4 x 10 GE(SFP+) and 40 x GE (SFP)------Number of Slots2 PICs2 PICs?2 MPUs?1 NSP?4 PICs?2 MPUs?2 NSPs?8 PICs?2 MPUs?2 NSPs?16 PICsDimensions(H x W x D)3.5 in. x 17.4 in. x 8.6 in. = 2U(89 mm x 442 mm x 220 mm =?2U)3.5 in. x 17. 4 in. x 8.6 in. = 2U(89 mm x 442 mm x 220 mm =?2U)5.1 in. x 17.4 in. x 8.6 in. DC = 3U (132 mm x 442 mm x 220 mm DC = 3U)7.0 in. x 17.4 in. x 8.6 in. = 4U?(178 mm x 442 mm x 220 mm AC = 4U)8.7 in. x 17.4 in. x 8.6 in.?DC = 5U?(222 mm x 442 mm x 220 mm DC =?5U)10.3 in. x 17.4 in. x 8.6 in. AC = 6U (264 mm x 442 mm x 220 mm AC = 6U)13.8 in. x 17.4 in. x 8.6 in. = 8U(353 mm x 442 mm x 220 mm = 8U)Power consumption(in full configuration)195W(DC)219W(AC)309W(DC)335W(AC)398W (DC)456W (AC)645W (DC)703W (AC)696W (DC)740W (AC)Weight in Full Configuration20.5 lb (9.3 kg) (DC)22.7 lb (10.3kg) (AC)20.7 lb (9.4 kg) (DC) ? ? ? ?22.9 lb (10.4kg) (AC)30.2 lb (13.7 kg) (DC)39.9 lb (18.1 kg?(AC)49.1 lb (22.3 kg) (DC)59.5 lb (27.0 kg) (AC)74.9 lb (34.0 kg) (DC) ? ? ? ?79.3 lb (36.0 kg) (AC)Interface Types?40 GE?10 GE?GE/FE?OC-3c/STM-1c POS?OC-12c/STM-4c POS?Channelized OC-3/STM-1 POS?E1/CE1Clock SynchronizationSynchronous Ethernet and IEEE 1588v2Layer 2 Features?IEEE 802.1q?IEEE 802.1p?IEEE 802.3ad?IEEE 802.1ab?STP/RSTP/MSTPIPv4/IPv6 Routing Protocols?IPv4 static routes and dynamic routing protocols, such as RIP, OSPF, IS-IS, and BGP?IPv4/IPv6 dual stack?IPv4-to-IPv6 transition technologies, such as manual tunnel, 6-to-4 tunnel, and 6PE?IPv6 static routes and dynamic routing protocols, such as BGP4+, RIPng, OSPFv3, and IS-ISv6?IPv6 neighbor discovery, PMTU discovery, TCP6, ping IPv6, tracert IPv6, socket IPv6, and IPv6 policy-based routingL2/L3 VPN?LDP over TE, VPLS, H-VPLS, and VPN policy-based routing?Martini MPLS L2VPN?VLL/VPLS accessing L3VPN?MPLS/BGP L3VPN and inter-AS VPNMulticast?IGMPv1/v2/v3?IGMP snooping?IPv6 multicast?Static multicast routing?PIM-SM?PIM-SSM?MBGP?NG MVPNQoS?WRED?Five-level HQoS?VLL/PWE3 QoSReliability?NSR for OSPF/RIP/LDP/RSVP-TE/PIM/MSDP/IGMP/ARP/L3VPN/IS-IS/BGP/VLL/VRRP?GR for BGP/OSPF/IS-IS/LDP/VLL/VPLS/RSVP/L3VPN/PIM?BFD for static route/fast reroute/VRRP/IS-IS/OSPF/BGP/PIM/LSP/IPv6?Fast convergence of BGP/IGP/multicast routes?IP/LDP FRR, TE FRR, VPN FRR, and VLL FRR?Ethernet OAM, Y.1731, and PWE3 E2E protection?ISSU and in-service patching for smooth software upgradesSecurity ? ? ? ? ? ? ? ? ? ? ? ??ACL-based packet filtering?AAA?SNMPv3 encryption and authentication?URPF, GTSM, DHCP snooping?ARP attack defense?SSHv2Value-added ServicesNAT, IPSec, GRE, and NetStreamOAMY.1731, IP FPM, MPLS OAM, 802.1ag, and 802.3ahOperating Temperature23?F to 147?F(-5?to 65?)23?F to 147?F(-5? to 65?)-40?F to 149?F(-40? to 65?)-40?F to 149?F(-40?C to 65?C)32?F to 113?F(0? to 45?)Operating Relative Humidity5% to 85%, non-condensingOperating Altitude? 9,842.5 ft. (3,000m)Ordering informationTypeDescriptionNE20E-S Basic ConfigurationNE20E-S16 DC Basic ConfigurationNE20E-S16 AC Basic ConfigurationNE20E-S8 DC Basic ConfigurationNE20E-S8 AC Basic ConfigurationNE20E-S4 DC Basic ConfigurationNE20E-S4 AC Basic ConfigurationNE20E-S2F DC Basic ConfigurationNE20E-S2F AC Basic ConfigurationNE20E-S2E DC Basic ConfigurationNE20E-S2E AC Basic ConfigurationNetwork Service Processor (NSP-50-E, apply for -40 to 65 degree scenarios)Network Service Processor (NSP-120-E, apply for -40 to 65 degree scenarios)Network Service Processor (NSP-A)Network Service Processor (NSP-B)NE20E-S Line Card1-Port 40G Base-CFP Physical Interface Card4-Port 10G Base LAN/WAN-SFP+ Physical Interface Card2-Port 10G Base LAN/WAN-SFP+ Physical Interface Card2-Port 10G Base LAN/WAN-SFP+ Physical Interface Card H1-Port 10G Base LAN/WAN-SFP+ + 8-Port 100/1,000 Base-X-SFP Physical Interface Card10-Port 100/1,000 Base-X-SFP Physical Interface Card10-Port 100/1,000 Base-X-SFP Physical Interface Card H8-Port 100/1,000 Base-RJ45 Physical Interface Card4-Port OC-3c/STM-1c POS-SFP Physical Interface Card2-Port OC-3c/STM-1c (or 1-Port OC-12c/STM-4C) POS-SFP Physical Interface Card4-Port Channelized STM-1c POS-SFP Physical Interface Card1-Port Channelized STM-1c POS-SFP Physical Interface Card32-Port E1 Physical Interface Card (75 ohm)32-Port E1 Physical Interface Card (120 ohm)16-Port E1 Physical Interface Card (75 ohm)16-Port E1 Physical Interface Card (120 ohm)SoftwareNE20E-S Series Base SW, VRP8, V800R007NE20E-S Series 1588v2 Function LicenseNE20E-S Series IP Performance Measure License (IP FPM)NE20E-S Series VxLan Function LicenseNE20E-S Series Rn to R(n+1) Software Release Entitlement from Rn to R(n+1)??